Shingles aren't made for flat or nearly flat roofs. EPDM rubber roofing gives porches, additions and carports a seamless, watertight cover that stands up to sun and storms.
Plenty of homes around Dandridge have a section of roof that's too flat for shingles — a back porch, a sunroom addition, a carport or a dormer. Shingles rely on gravity to shed water, so on a low slope they let water back up underneath. EPDM, a tough synthetic rubber membrane, is designed for exactly these spots.
EPDM goes down in large sheets with very few seams, so there are fewer places for water to get in. It stays flexible through hot summers and cold snaps and resists the UV exposure that breaks down cheaper materials.
ATech installs EPDM on homes and small commercial buildings, tying it neatly into the surrounding shingle or metal roof so the transition stays watertight. Tammy will look at your low-slope area and let you know whether EPDM is the right solution.
Here's why EPDM is a go-to choice for flat and low-slope sections.
Large membranes mean far fewer seams where water can find its way in.
Stays flexible through summer heat and winter freezes without cracking.
Built to withstand years of direct sun exposure on open porches and additions.
Small punctures or seam issues can be patched without replacing the whole roof.
When shingles get installed on a roof that's too flat for them, water eventually works its way underneath — and the result is stained ceilings, soft decking and leaks that keep coming back no matter how many times they're patched.
Replacing that section with a properly installed EPDM membrane solves the problem at the source. We prep the deck, adhere the membrane, seal the seams and edges, and flash it into the walls and roof around it.
Whether it's a porch roof that's leaked for years or a new addition that needs a roof, you'll get an honest recommendation and a fair price.
Every EPDM roof is installed as a complete, sealed system.
EPDM is a durable synthetic rubber roofing membrane made for flat and low-slope roofs. It comes in large sheets, so there are very few seams where leaks could start.
It's common on porch roofs, sunrooms, additions, carports, dormers and any section of roof too flat for shingles.
A properly installed EPDM roof can last for decades, especially when it's kept clear of debris and checked after major storms.
Yes. We flash and seal the transition between the EPDM section and your shingle or metal roof so water flows off without getting underneath.
Often, yes. Small punctures and seam problems can usually be repaired. If the membrane is worn out, we'll tell you honestly.
From your first phone call to the final cleanup, here's exactly what to expect when you hire ATech Roofing and Seamless Gutter.
Call 865-307-7141 or request online. Tammy will come out — often the next day — measure, answer your questions and give you a fair price, free.
We look over the whole system, explain what we find and recommend only what your home actually needs — no unnecessary replacements.
The work gets done fast — often within days — with nearly 30 years of experience behind it and often photos of the finished job.
We clean up so thoroughly you'd never know we were there — not one nail or scrap of trash left behind.
Family-Owned • Nearly 30 Years of Experience • Free Estimates • Roofing & Seamless Gutters • Serving Dandridge & East Tennessee